Brother QL-650TD manual Input Name and Password Administrator and click OK

16 Select the drive where you install the driver, and click [Install].

The screen in which the name and password of administrator is displayed.

17 Input "Name" and "Password" of

administrator and click [OK].

The screen to check the installation is displayed.

18 When continuing the installation, click [Continue Installation].

The installation starts.

19 When the installation is completed and the message "The software was successfully installed" is displayed, click [Restart].

Macintosh® is rebooted.

The installation of printer driver is completed.

51

Introduction

STEP

1

Before using the printer

STEP

2

only this printer	(No PC)
Using

STEP

3

20

After rebooting, connect the USB cable and power cord to the printer.

As the caution label is put on the USB port of the printer, remove it and then connect the USB cable.

Power cord slot

Power cord

USB port

USB cable

PC	For Windows
to your
Connecting	For Macintosh

STEP

4

21 Connect the USB cable to the USB port of Macintosh®. Press ON/OFF button ( ) of the printer to turn on the power.

When connecting the printer to Macintosh® via USB hub, it may not be connected correctly. At that time, connect the printer directly to the USB port of Macintosh®.

Maintenance and Troubleshooting