Brother QL500 manual Printing a Label, Print Options and label cutting

Printing a Label

This section explains the procedure for printing a label you have created.

1 In the Print property box, set the number of copies to

be printed to [1] and click .

The label is printed.

If the Print property box is not shown in the Property dock, click to display the box.

2 Cut off the printed label using the Cut button or the Cut lever (Brother QL-500) of the printer.

In the [Print] dialog box, if [Auto Cut] is checked in [Options], the printed labels will be automatically cut. (Not available for QL-500)

Print Options and label cutting

When you click in the Print property box, the [Print] dialog box appears.

This dialog box allows you to set the print options and the number of copies.

You can set the number of labels between cuts with the Option tab in the Print dialog box displayed when you click the Properties button. (QL-1050/1050N only)

	Setting			Description
		Auto Cut	When this check box is checked, each label will be automatically cut.
		(QL-550/650TD/	When this check box is not checked, labels won't be automatically cut after
		1050/1050N)	printing. Press the Cut button in the printer to cut.
		Cut at end
Options		(QL-650TD/	When multiple labels are printed, only cuts after the final label is printed.
		1050/1050N)
		Mirror Printing	When this check box is checked, labels will be printed so they can be seen
			when looking through a window.
		Output directly	For normal use, this check box should be checked.
		to Printer Driver
Copies		Number	Used to specify the number of copies to be printed.
			10	Printing a Label

Introduction

Creating Labels (For Windows)

Creating Labels (For Macintosh)

Appendix