Chapter 1
c Insert an RD Roll into the RD Roll compartment upside down with the labels feeding from the bottom as shown.
Make sure that the roll guide is properly positioned to prevent the RD Roll from moving sideways.
If the RD Roll is not inserted correctly, the printer will not print on the correct side of the paper or label.
When printing on die cut labels, set the roll guide so that there is
0.08 inches (2 mm) of space on both sides (0.16 inches (4 mm) total) of the scale.
Example: When using a
(105.6 mm).
d Align the RD Roll with the guide lines.
5
4
4Guide lines
5Tear bar
e Close the RD Roll compartment by pressing on the center of the cover.
f Press and hold the 
(Power) button to turn the printer on.
Note
When using die cut label, press the 
(Feed) button after inserting the RD
Roll. The printer will position the label to the correct starting position.
Use genuine Brother media.
6