Infrastructure Mode
5
1
4 
2
3
1Access point/router
2Your printer
3Wireless capable computer connected to the access point/router
4Wired computer connected to the access point/router
5Smartphone
Choosing Your Wireless Install Method
The following instructions will offer two methods for installing your printer in a wireless network environment. Choose the method you prefer for your environment.
Note
To set up your printer in any other wireless environment, refer to the Network User’s Guide.
Configuration using the Installer CD-ROM and temporarily using a USB cable
Setting Up the Printer
It is recommended that you use a computer wirelessly connected to your network for this
method.1
You need to temporarily use a USB cable (optional) during configuration.
If you are using Windows® XP or using a network cable to connect your computer with your wireless access point/router, you need to know the SSID and Network Key of your WLAN access point/router before you proceed. Please print out the following “MEMO” and write down your wireless network settings in the area below.
Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings.
MEMO
ItemSetting
SSID (Network Name)
Network Key (Security
Key/Encryption Key)
*The Network Key may also be described as the Password, Security Key or Encryption Key.
Note
•If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
•How can I find this information (SSID and Network Key)?
1Refer to the documentation provided with your WLAN access point/router.
2The initial network name could be the manufacturer's name or the model name.
11 