Chapter 1

Note

For Windows Vista® and Windows® 7 users, when the [Windows Security] screen appears, click the check box and click [Install] to complete the installation correctly.

The installation is now complete.

Note

Depending on your security settings, a Windows Security or antivirus software window may appear when using the printer or its software. Please allow or permit the installer to continue.

For USB Users

a Follow the on-screen instructions for installing the printer driver. When this screen appears, confirm the printer power is on. When instructed, connect the USB cable to your computer and then to the printer, to finish the printer driver installation.

b When the screen for the online user registration is displayed, click [OK] or [Cancel].

If you choose [OK], you will go to the online user registration page before finishing the installation (recommended).

If you choose [Cancel], installation continues.

c Click [Finish].

The installation is now complete.

One Push Configuration Using WPS and Installation

The procedure for installing the software varies depending on the OS of the computer.

The installation procedure is subject to change without notice.

Make sure that you are logged on with Administrator rights.

When the printer is on an Enterprise Wireless Network, connect the printer via USB and configure its wireless settings. If using the RJ-4040, you can also use the

Network Setting Tool to configure these settings once you have installed the printer driver.

For information about installing the printer driver, see Installation Procedure (Using USB Cable/Wireless Network)

uupage 12.

For information about the Network

Setting Tool, see Network Setting

Tool (RJ-4040 only) uu page 37.

This section explains how to install P-touch Editor 5.0, the printer driver, P-touch Update Software and the Printer Setting Tool using the Standard Installation option.

Windows® 7 is used in the following example.

a Confirm that your WLAN access point/router has the WPS symbol.

16