Chapter 4

Menu Bar

1

2

3

4

5

6

7

8

9

1 Apply Setting to the Printer

Applies the settings to the printer; functions the same way as the [Apply] button on the main window. See Apply uu page 38.

2Save Command Settings

Saves network settings in PJL command format. The file extension is “.bin”.

By sending these commands to printers via USB, network settings for printers can be configured in the same way as when settings are made using the Network Setting Tool (see Mass Storage uu page 44).

The following information is not saved in the setting command.

•Node name

•IP address, subnet mask, gateway address (when the IP address is set to [STATIC]).

These settings commands are only intended for use for applying to printer settings. Saved commands cannot be imported to the Network Setting Tool.

Saved command files contain authentication keys and passwords. Take necessary measures to protect saved command files such as by saving command files in locations that other users cannot access.

Do not send the command file to a printer whose model was not specified when the command file was exported.

40