Before printing labels

5 Close the cover.

6 Press the ON/OFF button.

The ON/OFF button lights up in blue.

Memo

ON/OFF button

If the cover is not properly closed or the tape cassette is not properly set, the ERROR lamp lights up. Repeat from Step 3 onwards.

Feed and Cut button

7 Press the Feed and Cut button.

This procedure removes any slack in the tape cassette.

Memo

This step is not necessary for SZ tapes.

Caution

If you do not use the machine for 10 minutes, the machine will release the roller holder. If you disconnect the machine from the power before this happens (without turning the machine off with the ON/OFF button first) the tape cassette may be locked inside the printer. Please make sure you turn the machine off using the ON/OFF button before disconnecting the AC adapter.

17

Page 17
Image 17
Brother RL-700S user manual Close the cover Press the ON/OFF button, Press the Feed and Cut button