Brother TD4100N, TD4000 Flow for Creating Labels, Connect the Power Supply, Install the software

4 Flow for Creating Labels

Labels can be created by using P-touch Editor. For details, see Î the Software User's Guide in the CD-ROM.

Follow the procedure described below to prepare for making labels. The following is the example for Windows Vista®.

1 Connect the Power Supply.

For details, see "Connecting the Power Supply" on page 11.

2 Install the software.

Install the printer driver to use the TD-4000/4100N as a printer with the PC and install the label design software.

For TD-4000, see "Installing the Software for TD-4000" on page 15. For TD-4100N, see "Installing the Software for TD-4100N" on page 17.

9

Introduction

STEP

1

Getting started

3 Connect the TD-4000/4100N to the PC.

4 Specify the paper or label size.

From [Control Panel], click [Hardware and Sound] or [Printers and Other Hardware], [Printers], right click on [Brother XX-XXXX], select [Printing Preferences], under [Paper] tab to specify the paper and label settings (width, length, label spacing, and paper width).

The list of paper sizes can be imported from other PC or exported to other PC, and the print location and the print density can be adjusted.

For details, see the Software User's Guide in the CD-ROM.

5	Print labels.
	• Printing from the P-touch Editor
	Start the P-touch Editor to create labels.
	• Printing from other applications
	Choose [File] - [Print]. (The printing procedure may differ depending on the
	application being used.)
	For details, see the Software User's Guide in the CD-ROM.

STEP

2

Installing the software

STEP

3

Reference