Brother TD4100N, TD4000 manual Is the printer set for sequential printing?

Problem	Solution
	• Is the printer set for sequential printing?
	If so, set print mode to buffered printing. (Open printer
	properties from [Control Panel] - [Printers (2000) / Printer and
	FAX (XP) / Hardware and Sound - Printers (Windows Vista®)]
	and click [Printing Preferences...] button in the [General] tab.
	Choose the option "After one page of data is received".)
	• An alternative solution is to disconnect the LAN cable until USB
When printing via the USB	printing is completed.
cable, the printer repeatedly
pauses and then continues
printing.
	• The procedure for feeding to the beginning of the label is
An error occurred when the roll	different for die cut labels and continuous length label. See
	"Setting the RD Roll" on page 12.
cannot be fed to the beginning	• When using die cut labels with a length of 6" (152.4mm) inches
of the label.	or more, an error may occur if the TD-4000/4100N cannot
	detect the beginning of the label after the first time that the roll
	is fed. To clear the error, press the Feed button again.

31

Introduction

STEP

1

Getting started

STEP

2

Installing the software

STEP

3

Reference