132
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Entering the pattern data
Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
aAttach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 43).
bPress (Utility stitch key) on the
operation panel, and select .
cCheck the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using , and
then press .
dSpecify whether single stitching or triple
stitching will be sewn between the points.
is single stitching, and gives
triple stitching.
eSpecify the coordinates of the second point,
and then press .
f
Repeat steps
d
through
e
to specify each point.
• If you make a mistake entering a point, press
, and the previous point is erased.
Memo
zIf you want to edit the pattern, press .
You can insert, delete and move points if
you have entered at least two points.
For details, refer to "Editing the pattern data"
(page 133).
gAfter all points have been entered, press .
XThe embroidery screen appears.
hSpecify the various stitching settings, such as
reverse/reinforcement stitching, in the same
way as with other stitches.
• To revise the pattern, press .
Memo
zThe pattern you entered can be saved for
later use. For details, refer to "Saving
patterns" (page 129).