28
GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
aPress (Needle position button) once or
twice to raise the needle, and then raise the
presser foot lever.
aNeedle position button
bPresser foot lever
bTurn off the sewing machine.
cSlide the bobbin cover latch to the right.
aBobbin cover
bLatch
XThe bobbin cover opens.
dRemove the bobbin cover.
eHold the bobbin with your right hand and hold
the end of the thread with your left hand.
• Be careful not to drop the bobbin.
fInsert the bobbin into the bobbin case with
your right hand.
• Be sure to insert the bobbin correctly.
CAUTION
gLightly hold down the bobbin with your right
hand, and then guide the thread as shown with
your left hand.
hPass the thread through the slot as shown, and
then pull the thread out toward the front.
aCutter
XThe cutter cuts the thread.
a
b
ab
●Be sure to insert the bobbin and depress it
to the bottom with your finger.
Otherwise, the thread may break or the
thread tension will be incorrect.
●Be sure to thread the machine as
indicated. Otherwise, the thread may
break or the thread tension will be
incorrect.
a