Replacing the Presser Foot 43
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Replacing the Presser Foot
This section describes how to replace the presser foot.

Presser foot precautions

Be sure to observe the following precautions concerning the presser foot.
CAUTION

Replacing the presser foot

Replace the presser foot as described below.
Memo
zFor details on attaching the embroidery foot
"Q", refer to "Attaching the Embroidery Foot"
(page 138).
zZigzag foot "J" is already installed when the
sewing machine is purchased.
aPress (Needle position button) once or
twice to raise the needle.
aNeedle position button
bTurn off the sewing machine.
CAUTION
cRaise the presser foot lever.
aPresser foot lever
XThe presser foot is raised.
dPress the black button at the back of the
presser foot holder.
aBlack button
bPresser foot holder
XThe presser foot holder releases the presser
foot.
●Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the needle to bend or break.
●Only use presser feet designed specifically for this sewing machine. Use of any other presser
foot may result in injuries or damage to the machine.
a
zBefore replacing the presser foot, be sure
to turn off the sewing machine.
Otherwise, injuries may occur if one of
the operation buttons is accidentally
pressed and the machine starts sewing.
a
b
a