Upper Threading 37
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
dInsert the extra spool pin into the end of the
bobbin winder shaft, and install the thread
spool on it. Then, thread the upper thread.
aBobbin winder shaft
bExtra spool pin
cThread spool
Memo
zWhen setting the thread spool, set it so that
the thread winds off from the front of the
spool.
eThread the upper thread for the right side in
the same way that the upper thread for the left
side was threaded.
• For details, refer to steps g through j of
"Threading the upper thread" (page 32).
fWithout passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
CAUTION
gAttach zigzag foot "J".
For details on changing the presser foot, refer to
"Replacing the Presser Foot" (page 43).
CAUTION
hTurn on the sewing machine and select a
stitch.
• For stitch selection see "Selecting stitching"
(page 51).
• See "Stitch Setting Chart" (page 72) for
stitches that use a twin needle.
CAUTION
●The needle threader cannot be used with
the twin needle. If the needle threader is
used with the twin needle, the sewing
machine may be damaged.
●When using the twin needle, be sure to
attach zigzag foot "J". If bunched stitches
occur, use presser foot "N" or use a
lightweight tear-away stabilizer.
●When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.