120
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
cSelect a stitch.
The stitches that can be used are 39 , 40 ,
41 , 42 , 43 , 44 , 45 , 46 or 47 .
• For details, refer to "Selecting stitching"
(page 51).
Note
zWhen sewing with the wing needle, select a
stitch width of 6.0 mm (15/64 inch) or less.
dStart sewing.
CAUTION
Partially removing threads is called "drawnwork".
This gives a beautiful result with fabrics that have a
loose weave.
Two ways to create drawnwork are described below.
■Drawnwork (Example 1)
aPull out several threads from the fabric.
bAttach monogramming foot "N".
• For details on replacing the presser foot, refer
to "Replacing the presser foot" (page 43).
cSelect stitch 39 .
• For details, refer to "Selecting stitching"
(page 51).
dWith the right side of the fabric facing up, sew
along the right edge of the frayed section.
●When sewing with the wing needle, select
a stitch width of 6.0 mm (15/64 inch) or
less, otherwise the needle may bend or
break.
●After adjusting the stitch width, slowly
turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
N