Blind Hem Stitching 85
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
dFold back the fabric inside along the basting.
aWrong side of fabric
bEdge of fabric
cBasting
d5 mm (3/16 inch)
eUnfold the edge of fabric, and position the
fabric with the wrong side facing up.
aWrong side of fabric
bBasting
cEdge of fabric
fAttach blind hem foot "R".
• For details on replacing the presser foot, refer
to "Replacing the presser foot" (page 43).
gSelect a stitch.
• For details, refer to "Selecting stitching" (page
51).
hRemove the flat bed attachment and make
free-arm sewing possible.
• For details on free-arm sewing, refer to "Free-
arm sewing" (page 46).
iSlide the item that you wish to sew onto the
arm, make sure that the fabric feeds correctly,
and then start sewing.
aArm
jPosition the fabric with the edge of the folded
hem against the guide of the presser foot, and
then lower the presser foot lever.
aWrong side of fabric
bFold of hem
cGuide
kAdjust the stitch width until the needle slightly
catches the fold of the hem.
aNeedle drop point
When you change the needle drop point, raise
the needle, and then change the stitch width.
aStitch width
1
2
1
3
4
S< Seen from the side>
11
2
3
11
S< Seen from the side>
R
a
1
R
c
b
R
1
a