158
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
dLower the presser foot lever.
aPresser foot lever
ePress (Start/stop button).
aStart/stop button
CAUTION
f After progressing 5-6 stitches, press
(Start/stop button) to stop the machine.
gUse scissors to cut the thread at the beginning
of the stitching.
Cut the thread at the edge of the stitching.
Note
zIf the thread is left at the beginning of the
stitching, it may be sewn over as you
continue embroidering the pattern, making it
very difficult to deal with the thread after the
pattern is finished. Trim the thread at the
beginning.
hPress (Start/stop button) again.
XThe embroidery begins again.
XStitching stops automatically with reinforce-
ment after one color has been completed.
When automatic thread cutting is set, the
thread is cut.
iSet up embroidery thread for the next color,
and repeat steps b through h.
XWhen the last color is sewn, "Finished
sewing." will appear on the display. Press
, and the display will return to the
initial screen.
jCut the excess thread.
Memo
zFor the automatic cutting setting, refer to
"LCD (liquid crystal display) operation"
(page 153).
●Use the embroidery frame that matches
the size of the pattern being embroidered.
Otherwise, the embroidery frame may be
hit by the presser foot and cause injury or
needle breakage.
a
a