Editing and Saving Patterns 161

4

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — �� — — — — — — — — — — — — — — — — — — —

Editing and Saving Patterns
This section describes ways to edit, adjust, reposition and memorize patterns.

Adjusting the layout

and the size

The pattern is normally positioned in the center of the
embroidery frame. You can check the layout before
starting embroidery and change the position and the
size.
Memo
zKeys that appear surrounded with a dotted
line (ex. ) cannot be used.
aAfter selecting the embroidery pattern, press
.
XThe sewing screen is displayed.
bPress .
XThe layout LCD is displayed.
cCheck and adjust the layout.
aLayout within the frame
bDisplay unit (cm/INCH)
cAvailable embroidery frames
dChange position keys
eSize key/Layout key
fRotation key
gHorizontal mirror image key
hTrial key
iStarting point key
jDistance from the center
kEmbroidery size
CAUTION
Embroidery frame size
The size of embroidery frame that can be
used is displayed. When the smaller mark
is grayed out in the display, embroidery
frame (small) cannot be used. These icons
flash if the pattern was resized, the layout
was adjusted, or the recommended
embroidery frame size was changed.

●Use the embroidery frame that matches

the size of the pattern being embroidered.

Otherwise, the embroidery frame may be

hit by the presser foot and cause injury or

needle breakage.