Brother 885-V35, V37 Removing the embroidery unit

Attaching the Embroidery Unit 143
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing the embroidery unit
Make sure that the sewing machine is completely
stopped and follow the instructions below.
aRemove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 149).
bPress , and then press .
XThe embroidery carriage moves into a
position where it can be saved.
Note
zIf this step is skipped, the carriage will not
move into a correct position; you cannot
put the embroidery cover on the embroidery
unit.
cTurn off the sewing machine.
CAUTION
dHold the release button on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
aRelease button
XThe embroidery unit separates from the
sewing machine.
CAUTION
●Always turn off the sewing machine
before removing the embroidery unit. It
may cause malfunctions if removed when
the machine is turned on.
●Do not carry the embroidery unit by
holding the carriage. It may cause
malfunctions.
a