Upper Threading 33
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
fSlide the spool cap onto the spool pin and
return the spool pin to its original position.
Slide the spool cap as far as possible to the right
as shown, with the rounded side on the left.
CAUTION
gPull the thread from the spool and pass the
thread under the hook of the thread guide.
aThread guide
hPass the thread behind the thread guide cover
and to the front.
While holding the thread near the spool with
your right hand, pull the thread with your left
hand as shown below.
aThread guide cover
bThread guide spring
cThread
dWhen the presser foot lever is lowered
Note
zWhen passing the thread behind the thread
guide cover, be sure to use both hands. If
you do not hold the thread with your right
hand, the thread will be loose and you will
not be able to secure the thread in the thread
spring guide. It may cause incorrect thread
tension.
zMake sure that the presser foot lever is raised
before passing the thread behind the thread
guide cover. If the presser foot lever is
lowered, the thread guide spring is shut and
you cannot hang the thread on the thread
guide spring correctly.
iPass the thread through the guides in the order
shown below.
●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break.
a
a
b
c
d
1
2
3
4