SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
52
eSelect the stitch type.
When selecting a decorative stitch
XThe screen containing the various stitches in
the selected stitch type appears.
• To select a different stitch type, press
(Back key).
fSelect a stitch.
(Previous page key) displays the previous
page, and (Next page key) displays the
next page.
Memo
zWhen touching the screen with your finger
is difficult, use the included touch pen.
aSelects decorative stitch
bSets width and length
cSelects single stitch sewing
dSelects repeat sewing
eMakes horizontal mirror image
fDeletes a selected pattern
gUsed for checking combined pattern
hActivates automatic thread cutting
iActivates automatic reverse/reinforcement stitch
• To select a different stitch, press to
remove the selected pattern.
gIf necessary, specify the settings for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
• For details on sewing with each of the utility
stitches, refer to Chapter3, "UTILITY
STITCHES" which begins from page 72.
Note
zWhen a stitch is selected, the icon for the
presser foot that should be used appears on
the screen. Check that the correct presser
foot is attached before starting to sew. If the
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.
Memo
zFor details on setting automatic reverse/
reinforcement stitching etc., refer to "Useful
Functions" (page 64).
zFor details on adjusting the stitch width,
stitch length and thread tension, refer to
"Setting the Stitch" (page 61).
■Selecting utility stitches
aFollow steps a to c in "Selecting stitching"
(page 51).
bSelect a stitch.
Memo
zThe utility stitch selection screen appears
when you turn on the machine.
Example: When 11 is selected:
a
b
f
h