Configuring your machine for a network with an Ethernet cable connection

d Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server.

Windows®

2

Macintosh®

e f

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

Using the control panel to configure your machine for a network

You can configure your machine for a network using the control panel Network menu. (See Control panel setup on page 76.)

Using other methods to configure your machine for a network

You can configure your machine for a network using other methods. (See Other ways to set the IP address (for advanced users and administrators) on page 164.)

14