29
k Choose and press the Authentication method. If you chose Open System, go to l.
If you chose Shared Key, go to m.
If you chose WPA/WPA2-PSK, go to p.
l Choose and press the Encryption type None or WEP. If you chose None, go to r.
If you chose WEP, go to m.
Enter the SSID name. (For information how to type text, see Entering Text on page 179.) Go to j.
Choose <New SSID> using a or b. Go to i.
h i
j Press Infrastructure when instructed. Go to k. If you chose Ad-hoc, go to l.
Press Setup Wizard.
Press WLAN.
Press Network.
Press MENU.
Turn on the machine by plugging in the power cord.
b c d e f
g The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use a or b key to choose your network. Go to k.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to h.
Write down the wireless network settings of your access point or wireless router. „ SSID (Service Set ID or Network name)
„ WEP key (if needed)
„ WPA-PSK Encryption (TKIP or AES) „ WPA-PSK password (if needed)
a
Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
(For Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite or Initial Installation / Install MFL-Pro Suite from the CD-ROM menu.
(For Macintosh®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the CD-ROM menu.
For Touchscreen models

3