Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)

LCD messages when using the SES/WPS/AOSS control panel menu

LCD shows

Connection status

Action

Setting WLAN

Searching or accessing the access point,

 

and downloading settings from the access

—

 

point.

 

Connecting SES

 

3

Connecting WPS

Connecting to the access point.

—

Connecting AOSS

 

 

 

Connected

Connection succeeded.

—

 

 

Connection failed.

1 Try starting from e again.

Connection Failed

(If this is shown after the LCD shows

2 If the same message continues,

Connecting SES, Connecting WPS or

reset the machine back to the

 

Connecting AOSS.)

factory settings and try again.

 

 

A session overlap was detected.

Check that only one router or access

 

 

point has SecureEasySetup™, the

 

 

Incorrect Mode

A session overlap was detected.

Wi-Fi Protected Setup™ mode or

AOSS™ mode enabled and try starting

 

 

from e again.

i Press .

(For Windows®)

You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite or Initial Installation / Install MFL-Pro Suite from the CD-ROM menu.

(For Macintosh®)

You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the CD-ROM menu.

34