Turn on the machine by plugging in the power cord.

Wireless configuration for Windows® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)

Configuration using the SES/WPS/AOSS control panel menu (One-Push method)

Before configuring the wireless settings

IMPORTANT

• If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Use Menu, a or b to choose Network, press 4 OK. Press a or b to choose Factory Reset, press OK. Choose Yes to accept the change. For Touchscreen models, press MENU, Network, a or b to display Factory Reset then press

Factory Reset, and choose Yes to accept the change. The machine will restart automatically.

•If you are using Windows® Firewall or a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once you are sure that you can print, configure the software settings following the instructions again.

Configure the wireless settings

a

b Press Menu.

Press a or b to choose Network, press OK. Press a or b to choose Network I/F, press OK. Choose WLAN.

(For Touchscreen models)

Press MENU. Press Network. Press Network I/F and then press WLAN.

c Turn on your computer.

Close any applications running before you start configuration.

d Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically. If the

model name screen appears, choose your machine. If the language screen appears, choose your language.

45