Wireless Configuration for Macintosh® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)

k To communicate with the un-configured wireless machine, temporarily change the wireless settings on your computer to match the machine’s default settings shown on this screen. Check the box after you confirm these settings, and then click Next.

5

Note

You can temporarily change the wireless settings on your computer, following the steps below:

1Click the AirPort status icon and select Open Internet Connect...

2Click the Network tab to see the available wireless devices. You can see the Brother wireless print server in the Network option. Select SETUP.

3Your wireless network is connected successfully.

l Choose the machine you wish to configure, and click Next. If the list is blank, check if the machine is powered on, and then click Refresh.

Note

The default Node name is “BRWxxxxxxxxxxxx” (where “xxxxxxxxxxxx” is your Ethernet address).

72