Configuring your machine for a wireless network (Not available for
Note
The setting page is different, depending on the brand of access point / router. See the instruction manual that came with your access point / router.
If you are using your Windows Vista® computer as a Registrar, follow the instructions below.
Note |
| 3 | ||
| ||||
To use a Windows Vista® computer as a Registrar, you need to register it to your network in advance. See | ||||
|
| |||
the instruction manual that came with your access point / router. |
|
| ||
|
|
|
| |
1Click 
and then Network.
2Click Add a wireless device.
3Choose your machine and click Next.
4Input the PIN from the printed page and then click Next.
5Choose your network that you want to connect to, and then click Next.
6Click Close.
h If the LCD shows Connected, the machine has successfully connected to your router or access point. You can now use your machine in a wireless network.
If the LCD shows Connection Failed, the machine has not successfully connected to your router or access point. Try starting from eagain. If the same message is indicated again, reset the machine back to the default factory settings and try again. For resetting, see Restoring the network settings to factory default on page 124.
i Press 
.
(For Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install
(For Macintosh®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the
Using the Brother automatic installer application on the
For installation, see Wireless configuration for Windows® using the Brother installer application (Not available
for
37