Bryant 548D START-UP Checklist, Preliminary Information, III. START-UP Electrical, Temperatures

START-UP CHECKLIST

(Remove and Store in Job File)

I. PRELIMINARY INFORMATION
MODEL NO.: _______________________________________	SERIAL NO. ___________________________________________
DATE: _____________________________________________	TECHNICIAN: _________________________________________
UNIT NO.: _________________________________________	JOB LOCATION: _______________________________________
	JOB NAME: ____________________________________________

II. PRE-START-UP (insert checkmark in box as each item is completed)

VERIFY THAT CONDENSATE CONNECTION IS INSTALLED PER INSTALLATION INSTRUCTIONS CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS

CHECK THAT RETURN (INDOOR) AIR FILTERS ARE CLEAN AND IN PLACE

VERIFY THAT UNIT INSTALLATION IS LEVEL

CHECK FAN WHEEL AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE

AND SETSCREW TIGHTNESS

￿CHECK PULLEY ALIGNMENT AND BELT TENSION PER INSTALLATION INSTRUCTIONS ENSURE BELT TENSION AND BLOWER PULLEYS ARE PROPERLY ALIGNED

III.START-UP

ELECTRICAL
SUPPLY VOLTAGE	L1-L2	L2-L3	L3-L1
CIRCUIT NO. 1 COMPRESSOR AMPS	L1	L2	L3
CIRCUIT NO. 2 COMPRESSOR AMPS	L1	L2	L3
INDOOR FAN AMPS	L1	L2	L3

TEMPERATURES
OUTDOOR-AIR TEMPERATURE	DB (dry bulb)
RETURN-AIR TEMPERATURE	DB	WB (wet bulb)
COOLING SUPPLY AIR	DB	WB

CUT ALONG DOTTED LINE

PRESSURES (Cooling Mode)
REFRIGERANT SUCTION, CIRCUIT 1	PSIG	° F
REFRIGERANT SUCTION, CIRCUIT 2	PSIG	° F
REFRIGERANT DISCHARGE, CIRCUIT 1	PSIG	° F
REFRIGERANT DISCHARGE, CIRCUIT 2	PSIG	° F

￿VERIFY THAT 3-PHASE SCROLL COMPRESSOR IS ROTATING IN CORRECT DIRECTION. VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS ON PAGES 32 AND 33.

CUT ALONG DOTTED LINE

Copyright 2000 Bryant Heating & Cooling Systems CL-1 CATALOG NO. 5354-805