583B CORNER WEIGHTS

12

y

4 x 3

CORNER #

024

030

036

042

048

060

1

55.1

59.5

61.0

72.6

80.0

88.9

2

52.2

56.3

57.8

68.8

75.8

84.2

3

89.9

97.0

99.5

118.4

130.5

145.1

4

92.8

100.2

102.7

122.2

134.7

149.8

TOTAL WEIGHT

290

313

321

382

421

468

SELECTION PROCEDURE (WITH EXAMPLE)

I DETERMINE COOLING AND HEATING REQUIREMENTS

AT DESIGN CONDITIONS:

 

Given:

 

Required Cooling Capacity (TC)

35,000 Btuh

Sensible Heat Capacity (SHC)

25,000 Btuh

Required Heating Capacity

60,000 Btuh

Condenser Entering Air Temperature

95°F

Indoor-Air Temperature

80°F edb 67°F ewb

Evaporator Air Quantity

1200 CFM

External Static Pressure

0.1 in. wg

Electrical Characteristics

230-1-60

IISELECT UNIT BASED ON REQUIRED COOLING CAPACITY.

Enter Net Cooling Capacities table at condenser entering temperature of 95 F. Unit 583B036 at 1200 cfm and 67 F ewb (entering wet bulb) will provide a total capacity of 35,900 Btuh and a SHC of 26,700 Btuh. Calculate SHC correction, if required, using Note 3 under Cooling Capacities tables.

IIISELECT HEATING CAPACITY OF UNIT TO PROVIDE DESIGN CONDITION REQUIREMENT.

In the Heating Capacities and Efficiencies table on page 4, note that the unit 583B036090 will provide 70,000 Btuh with an input of 90,000 Btuh.

IV DETERMINE FAN SPEED AND POWER REQUIRE– MENTS AT DESIGN CONDITIONS.

Before entering the air delivery tables, calculate the total static pressure required. From the given example, the Wet Coil Pressure Drop Table, and the Filter Pressure Drop table on page 16, find at 1200 cfm:

External Static Pressure

0.1 in. wg

Filter

0.13 in. wg

Total Static Pressure

0.23 in. wg

 

Enter the table for Wet Coil Air Delivery — Horizontal and Downflow Discharge on page 16. For 208 v operation, deduct 10% from value given. At .23 ESP (external static pressure), the fan will deliver 1327 cfm at low speed. The fan speed should be set at low speed.

VSELECT UNIT THAT CORRESPONDS TO POWER SOURCE AVAILABLE.

The Electrical Data table on page 21 shows that the unit is designed to operate at 208/230-1-60.

— 12—

Page 12
Image 12
Bryant manual 583B Corner Weights, Selection Procedure with Example, II Select Unit Based on Required Cooling Capacity

583B specifications

The Bryant 583B is an advanced, high-efficiency gas furnace designed to provide exceptional heating performance and reliability. With a focus on comfort and energy efficiency, this model stands out in the residential heating market.

One of the main features of the Bryant 583B is its impressive Annual Fuel Utilization Efficiency (AFUE) rating of up to 95%. This means that the furnace converts up to 95% of the fuel it consumes into usable heat. As a result, homeowners can expect lower energy bills and reduced environmental impact due to decreased carbon emissions.

The Bryant 583B is equipped with a modulating gas valve that allows for precise control of the heating output. This technology enables the furnace to adjust its running capacity based on the heating demands of your home. Instead of operating at a single, high setting, the furnace runs at the required level to maintain the desired temperature, delivering consistent comfort while maximizing efficiency.

Another noteworthy characteristic of the 583B is its two-stage operation. This feature allows the furnace to operate at a lower stage for mild weather, which reduces energy consumption and minimizes noise levels. During colder conditions, it can switch to a high stage for increased heating capacity. This dual approach not only enhances comfort but also prolongs the lifespan of the unit by reducing wear and tear.

In terms of construction, the Bryant 583B is built with durable materials and a robust cabinet, which ensures longevity and resilience over time. It also comes with a quiet operation feature, minimizing disturbances while maintaining a comfortable indoor environment.

The unit is compatible with Bryant's advanced communication technology, enabling seamless integration with smart thermostats. This addition allows homeowners to monitor and control their furnace remotely, optimizing energy usage even further.

In summary, the Bryant 583B furnishes an outstanding combination of efficiency, reliability, and user-friendly technologies. Its modulating gas valve, two-stage operation, and high AFUE rating collectively ensure that customers enjoy a comfortable home environment while significantly reducing energy costs. As energy-conscious choices become increasingly crucial, the Bryant 583B stands ready to meet the challenges of modern heating needs.