OPTIONS AND ACCESSORIES

Factory-installed options

Coil options include copper/copper and vinyl-coated construc- tion for refrigerant coils. Units are shipped standard with copper tube/aluminum fin construction. See model number nomencla- ture for coil options.

Electronic Variable-Speed Motor — ICM Motors (Integrated Control Motor) provide variable-speed operation to optimize comfort levels year round. They are also more economical to op- erate than standard motors.

Field-installed accessories

Economizer with Solid-State Controls and Barometric Relief Dampers

Manual Air Damper (25% open)

Filter Rack

Roof Curbs (8-in. and 14-in.)

Square-to-Round Duct Transition Kit

Thermostats

Crankcase Heater

Compressor Hard Start Kit (for use on single-phase units only)

LP Conversion Kit

High Altitude Kit

Low Ambient Kit (Motormaster® II Control)

Solid-State Time Guard® II Device

Lifting Kit

LP to Natural Conversion Kit

Economizer with solid-state controls and barometric relief

dampers includes filter racks and provide outdoor air during cooling and reduce compressor operation.

Manual outside air damper includes hood and filter rack with adjustable damper blade for up to 25% outdoor air.

Flat roof curbs in both 8 in. and 14 in. sizes are available for roof mounted applications.

Square-to-round duct transition kit enables 024-048 size units to be fitted to 14 in. round ductwork.

Compressor hard start kit assists compressor start-up by pro- viding additional starting torque on single phase units and pro- longs compressor motor life.

Thermostats provide control for the system heating and cooling functions. Thermostat models are available in both programma- ble and non-programmable versions.

Crankcase heater provides anti-floodback protection for low- load cooling applications.

LP (liquid propane) conversion kit allows for conversion from

natural gas to liquid propane fuel.

Low-ambient kit (Motormaster® II control) allows the use of mechanical cooling down to outdoor temperatures as low as 0°F.

Solid-state Time Guard® II device provides short-cycling pro- tection for the compressor. Not required with corporate electron- ic thermostats.

Filter rack features easy installation, serviceability, and high- filtering performance for vertical applications.

High altitude kit is for use at 2001 to 6000 ft above sea level. Kit consists of natural gas orifices that compensate for gas heat operation at high altitude.

LP to natural gas conversion kit allows conversion back to

natural gas.

Lifting kit includes lifting brackets which are inserted into the basepan handholds to rig unit for rooftop applications.

— 7—

Page 6 Page 8
Page 7
Image 7
Bryant 583B manual Options and Accessories, Factory-installed options
Page 6 Page 8

583B specifications

The Bryant 583B is an advanced, high-efficiency gas furnace designed to provide exceptional heating performance and reliability. With a focus on comfort and energy efficiency, this model stands out in the residential heating market.

One of the main features of the Bryant 583B is its impressive Annual Fuel Utilization Efficiency (AFUE) rating of up to 95%. This means that the furnace converts up to 95% of the fuel it consumes into usable heat. As a result, homeowners can expect lower energy bills and reduced environmental impact due to decreased carbon emissions.

The Bryant 583B is equipped with a modulating gas valve that allows for precise control of the heating output. This technology enables the furnace to adjust its running capacity based on the heating demands of your home. Instead of operating at a single, high setting, the furnace runs at the required level to maintain the desired temperature, delivering consistent comfort while maximizing efficiency.

Another noteworthy characteristic of the 583B is its two-stage operation. This feature allows the furnace to operate at a lower stage for mild weather, which reduces energy consumption and minimizes noise levels. During colder conditions, it can switch to a high stage for increased heating capacity. This dual approach not only enhances comfort but also prolongs the lifespan of the unit by reducing wear and tear.

In terms of construction, the Bryant 583B is built with durable materials and a robust cabinet, which ensures longevity and resilience over time. It also comes with a quiet operation feature, minimizing disturbances while maintaining a comfortable indoor environment.

The unit is compatible with Bryant's advanced communication technology, enabling seamless integration with smart thermostats. This addition allows homeowners to monitor and control their furnace remotely, optimizing energy usage even further.

In summary, the Bryant 583B furnishes an outstanding combination of efficiency, reliability, and user-friendly technologies. Its modulating gas valve, two-stage operation, and high AFUE rating collectively ensure that customers enjoy a comfortable home environment while significantly reducing energy costs. As energy-conscious choices become increasingly crucial, the Bryant 583B stands ready to meet the challenges of modern heating needs.
Top Page Image Contents