Set the date and time format | BT 335 specs

8 Getting started

The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries can be obtained from the BT Freestyle Helpline 0800 218 2182.

Batteries and handset may become warm during charging. This is normal.

Your BT Freestyle 335 uses the 24 hour clock.

If you have more than one handset registered to your base, you only need to set the date and time on one handset and the other handsets will be automatically updated.

Set the date and time format

1.Press the Left soft key to open the main menu.

2.Press or until the display shows HS SETTINGS and press OK soft key. DATE & TIME is displayed, press the OK soft key again.

3.DATE FORMAT is displayed, press the OK soft key and the

current format is displayed. Press or to change between DD-MM-YYand MM-DD-YY. Press the OK soft key, you will hear a confirmation tone.

4.Press and TIME FORMAT is displayed. Press the OK soft

key and the current format is displayed. Press or to change between 24hr and 12hr. Press the OK soft key, you will hear a confirmation tone.

5.Press and hold thesoft key to return to standby.

If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email bt.helpdesk@vtecheurope.com

Image 8

BT 335 manual Set the date and time format

Contents

User Guide Welcome… Need help? This guide Base settings Caller DisplayGeneral information Answering machine Signal strength Getting startedLocation Handset range Battery low warning Battery performanceWhich socket? Talk/Standby time Set the date and time format Set the date and time Your BT Freestyle 335 is now ready for use Helpline Setting up the chargerYour BT Freestyle 335 multiple pack is now ready for use Getting to know your phone Handset Handset display icons Find BaseCharger Navigating the menus Left soft key Right soft key Up and Down keys Handset menu map Menu navigation Default CONFIRM? is displayed, press OK Default settings table Handset Using the phone Volume To increase the volumeTo decrease the volume Make a call in handsfree Secrecy Switch to handsfree during a callAnswer a call in handsfree Redial To copy a redial number to the directory To delete a number from the redial list To delete the entire redial list Handsets Ringer volume on/offKeypad lock Transferring calls Making internal callsReceiving internal calls Way conference calls Directory Store a numberEntering names Insert a pause in a number Searching for a name Dial/view a numberEdit a directory entry Delete a directory entry Delete all directory entries Directory capacity Ringer melody Handset settingsRinger volume Handset settings Handset tones on/off Handset name Display Alarm Registering handsets Auto answer Change PIN code Base settingsDial mode Base settings Delete handset View/dial a number Caller DisplayCalls list To copy a Calls list number to the directory Delete a number Delete the entire Calls list Switch on/off Answering machine Call Screening Answer and RecordAnswer Only Select answer mode Record your own outgoing message Play/check outgoing message Reinstate pre-recorded outgoing messages Message playback Playing messages To record a memo Adjust volume for message playbackDelete all old messages To playback a memo Memory full Answer delay Time Saver Switch answering machine on Change security PIN code Remote access commands Check for messages Help Your caller cannot hear you Handset is not charging properlyHandset does not ring Safety information General information Product disposal instructions Additional/Replacement Items Technical information Ofﬁces worldwide