Baby Alarm
To switch the baby alarm ON and OFF
The baby alarm sets up a connection between two handsets registered to the same base. When a noise registers in the first handset, the second handset rings. If the call to the second handset is answered, conversation is possible. The default setting for this service is OFF.
The baby alarm will not work in conjunction with call barring. For the baby alarm to work properly, all handset batteries must be fully charged and the handset in the ‘baby room’ must not be placed in a charger, as this will cover the microphone.
Ensure that the handset in the ‘baby room’ is out of reach of the baby, (due to the small and sharp parts that are present).
WARNING
Please note that the Baby Alarm
does not provide continuous
monitoring but is activated only by
noises over a certain volume.
It should therefore only be used as
a support to your existing baby monitoring system and NOT as an alternative.
On the handset in the ‘baby room’:
OK
•Press the MENU button.
•Select BABY ALARM.
•Press OK.
•Enter the extension number of the handset you want to ring as the alarm.
38
