If you have a problem, the following simple solutions may provide the answer.
No display appears
Is the handset switched on? The battery may be flat or dead. Recharge or replace the battery.
No dial tone
Is the telephone line cord plugged into the phone socket and the base station?
If other handsets are registered on the base, the outside line may already be in use. Wait until the call is finished and try again.
‘Search station’ is flashing on the display or you can not link up with the base station
Is the handset registered with the base station? To register the handset, see page 12.
Is the power cable connected at the base and power switched on at the wall socket?
Is the handset within range of a base station to which it is registered.
Please note: If you go out of range of
a base station for a long time while your handset is switched ON, it may take more than 20 minutes to ÔfindÕ the base station again when you come back within range. However, by simply switching the handset OFF for a moment, and then ON again, it will find the base station within a few seconds.
52
