Hitachi DZMV380E, DZMV350E Recording Stills, Still recording mode, Number of recordable stills

English

￿￿

Recording Stills

Note:

Recording of still images is possible on DVD-RAM disc and card.

ACCESS/PC	CARD
indicator
	ACCESS
	indicator

Power switch

1 Turn the DVD video camera/recorder on.

When using DVD-RAM disc:

Set the power switch to “ PHOTO”. When using card:

Set the power switch to “￿PHOTO”.

After the ACCESS indicator goes out, perform the subsequent operation:

Still recording mode

REM 9 9 9

Number of recordable stills

1 7 : 0 0

3 0 / 9 / 2 0 0 3

2 Check the subject on the screen (viewfinder or LCD).

3 Press the REC button.

The DVD video camera/recorder automatically focuses on the subject at the center of screen (when auto focus is selected).

The screen will be black, and then the recorded still will be displayed. When the “￿” mark appears, you can proceed with the next recording; while “DISC ACCESS” or “CARD ACCESS” is being displayed, you cannot proceed with the next recording.

4 Set the power switch to “POWER OFF” to turn the DVD video camera/recorder off.

Note:

•See “Still recording quality” on page 28 for details of stills on card.

•Do not operate the power switch or remove the card while the ACCESS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card.

•With DZ-MV380E, the range of screen in which recording is possible will be different for movie and still.

(When using DVD-RAM disc)

Still recording mode		REM 9 9 9
Number of recordable stills
FINE	3 0 /	1 7 : 0 0
		9 / 2 0 0 3

(When using card)

54