MACRO RECORDING

Use the macro function when recording a small object from close-up position: You can shoot the subject as close as approximately 2 cm from the lens surface, magnifying the image to fill the screen.

English

1 Aim the DVD video camera/recorder at the subject, and press the zoom lever to “W” control side.

Note:

Zoom can be used, but the subject may not be focused, depending on the distance to the subject. In this case, move the zoom to “W” control side to focus.

The amount of light tends to be insufficient during macro recording: If the subject image is too dark, use additional lighting.

RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO EFFECT

Use tele-conversion lens or wide-conversion lens to record subjects for stronger telephoto or wide-angle effect.

Use conversion lenses with the following filter diameters:

DZ-MV350E: 30.5 mm

DZ-MV380E: 37 mm

1 Remove the lens hood from DVD video camera/

2 Remove the cap of conversion lens, and screw

recorder.

the lens into the filter thread of DVD video

 

camera/recorder until it stops.

Lens hood

Conversion lens

(Remove)

(Attach)

*With DZ-MV380E, you can use the optional conversion lenses:

Tele-conversion lens (DZ-TL1): For stronger telephoto effect

Wide-conversion lens (DZ-WL1): For stronger wide-angle effect

Note:

Be careful not to lose the removed lens hood.

With DZ-TL1 tele-conversion lens, the focusing range at “T” (telephoto) control side is between approx. 5 m and infinite.

When a conversion lens is attached, note that if you zoom in on a subject, vignetting will slightly occur on the “W” (wide-angle) control side (the four corners of screen will be dim).

57

Page 57
Image 57
Hitachi DZMV350E, DZMV380E instruction manual Macro Recording, Lens hood Conversion lens Remove Attach