Pioneer DVR-440H-S manual Record successfully, After briefly unplug, Ging or after a power

15Additional information

Problem	Remedy
Timer program doesn’t	• When setting the recording channel, make sure you set the
record successfully	recorder’s built-in TV tuner, not the TV’s built-in tuner.
	• When recording to a Video mode disc, programs that are copy-once
	protected cannot be recorded. Use a VR mode formatted disc for copy-
	once material (page 54).
	• Two timer programs may have overlapped, in which case only the
	earlier one will record completely.
	• The power may have failed during recording.
After briefly unplug-	• A backup battery inside the recorder keeps the clock and other
ging or after a power	settings from being reset when there is no power to the recorder. After
failure the front panel	unplugging or a power failure, the battery keeps all settings for a
display shows ‘--:--’	period of several minutes. Reset the clock and other recorder settings
	to use the recorder again.
Front panel display	• The Child Lock is on; turn off in order to use the recorder (page 62).
shows ‘LOCK’ when a
button is pressed

Can’t use One Touch • Make sure that there is a recordable DVD-R/-RW loaded with some

Copy (HDD to DVD) free space for recording and fewer than 99 titles already on the disc. Also make sure that for a Video mode disc or a DVD+R, the disc isn’t finalized.

•Make sure there is a recordable DVD+R/+RW loaded with some free space for recording and fewer than 49 titles already on the disc.

•If you delete a title from a DVD+R/+RW disc, the number of remaining recordable titles may not decrease.

•Further recording is not possible on a finalized DVD+R. Check that there isn’t a disc menu on the disc you’re trying to use.

•If the title currently playing contains material that is copy-once protected, One Touch Copy will not work.

•One Touch Copy can’t be used for titles over 8 hours long when copying to DVD+R/+RW (though you can use a DVD+R DL).

•One Touch Copy can’t be used for MN1 to MN6, SEP, SLP or EP titles when copying to DVD+R/+RW.

•One Touch Copy doesn’t work if the recorder is already recording to DVD.

Can’t use One Touch • Make sure that there is space available on the HDD and that there

Copy (DVD to HDD) are fewer than 999 titles on the HDD.

•One Touch Copy doesn’t work if the recorder is already recording to the HDD.

134

En