Pioneer DVR-440H-S manual This enables you to watch discs

Connecting up 02

SCART AV	ANTENNA
CONNECTOR	IN
2	TV
	1

ANTENNA

IN (RF IN)

AV 1 (RGB) – TV	AV 2 (INPUT 1/DECODER)
Y	IN

AC IN			PB	OUTPUT
DIGITAL	CONTROL				L
OUT				R
			PR		OUT
COAXIAL	IN	G-LINK	COMPONENT	AUDIO	ANTENNA
			VIDEO OUT

ANTENNA

OUT

4

SCART AV		3			ANTENNA	1
CONNECTOR					OUT
	Cable/Satellite/			ANTENNA
	Digital Terrestrial
					IN
	receiver
			1
						Satellite dish/
						antenna/cable TV
						wall outlet

1Connect RF antenna cables as shown. This enables you to watch and record TV channels.

2Use a SCART cable (not supplied) to connect the AV1(RGB)-TV AV connector to a SCART AV connector on your TV.

This enables you to watch discs.

3Use another SCART cable to connect the AV2(INPUT 1/DECODER) AV connector to a SCART AV connector on your cable box/satellite/digital terrestrial receiver.

This enables you to record scrambled TV channels.

4Plug the supplied G-LINK™ cable to the G-LINK™ jack.

This enables you to control the tuner in the external receiver using the GUIDE Plus+® system.

Position the IR transmitter end of the G- LINK™ cable so that the IR receiver on your cable/satellite/digital terrestrial receiver will pick up the control signals (see diagram).

AV 1 (RGB) – TV

			Y
DIGITAL			PB	OUTPUT
OUT	CONTROL			R	L
			PR
COAXIAL	IN	G-LINK	COMPONENT		AUDIO
			VIDEO OUT

G-LINK cable

See the manual that came with your cable/ satellite/digital terrestrial receiver if you’re not sure where the IR receiver is on the front panel. Alternatively, experiment with the remote control, operating it from very close range until you find the place where the receiver responds.

Tip

•This recorder has a ‘through’ function which allows you to record a TV program from the built-in TV tuner in this recorder while watching a video playing on your VCR. (To use this feature when the recorder is in standby, Power Save must be set to Off—see Power Save on page 116).

19

En