
The Initial Setup menu | 14 | ||
|
|
|
|
Setting | Options | Explanation |
|
|
|
|
|
Set Preview | Quick Preview • | When in the Disc Navigator, the thumbnail video | |
(HDD only) |
| plays short excerpts from throughout the selected | |
|
| title. (Note that edited titles that will play normally | |
|
| from the beginning.) | |
|
|
|
|
| Normal | The thumbnail video plays from the beginning of the | |
|
| title. | |
|
|
|
|
Additional information about the TV system settings
About the input line system
This recorder is compatible with PAL, SECAM, 3.58 NTSC and
Please note the following points when changing the input line system:
•When the current input is a
•If, when the Input Line System setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel STOP button then pressing
OPEN/CLOSE (also front panel) while the recorder is stopped.
•When you switch the Input Line System setting the Copy List is erased. If you
switch the setting using the STOP button and OPEN/CLOSE buttons as described above, there is no confirmation, so please use with care.
•You can’t mix recordings of different TV line systems on the same disc.
•When you change this setting, the Input Colour System setting also changes (see below).
About NTSC on PAL TV
Depending on the Input Line System setting and the NTSC on PAL TV setting, the signal format output when the recorder is stopped varies as shown in the table below.
Input Line | NTSC on PAL | Output |
when | ||
System | TV | stopped |
|
| |
|
|
|
625 System | Off | PAL |
|
|
|
| On | PAL |
|
|
|
525 System | Off | NTSC |
|
|
|
| On | |
|
|
|
127
En