
Connecting up
Connecting an external decoder box (2)
If you only have a decoder, connect it to this recorder and your TV as shown on this
page.1
Using the setup on this page you can:
•Record scrambled channels received using the recorder’s
Important
•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/ receiver.
SCART AV | ANTENNA | |
CONNECTOR | ||
IN | ||
| ||
2 |
| |
| TV | |
| 1 |
ANTENNA
IN (RF IN)
AV 1 (RGB) – TV | AV 2 (INPUT 1/DECODER) |
Y | IN |
AC IN |
|
| PB | OUTPUT |
|
DIGITAL | CONTROL |
| L | ||
OUT |
| R | |||
|
|
| PR |
| OUT |
|
|
|
|
| |
COAXIAL | IN | COMPONENT | AUDIO | ANTENNA | |
|
| VIDEO OUT |
|
|
ANTENNA
OUT
3
1
SCART AV
CONNECTOR
Antenna/cable TV
Decoder wall outlet
02
1Connect RF antenna cables as shown. This enables you to watch and record TV channels.
2Use a SCART cable (not supplied) to connect the
This enables you to watch discs.
3Use another SCART cable to connect the AV2(INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box.
This enables you to record scrambled TV channels.
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
•Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 119).
•From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 118).
21
En