
Recording
Using the built-in TV tuner
There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.
CHANNEL
+
• | – | CHANNEL +/– buttons |
| CHANNEL | |
REC MODE |
|
|
AUDIO | SUBTITLE ANGLE | |
|
| PLAY MODE |
• |
| Number buttons |
For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4,
ENTER.1
• CH +/– buttons on the front panel
Changing audio channels
You can change the audio channel of the broadcast or external input signal.
SHIFT AUDIO
•
+
Press to change the audio type.
The current audio channel is displayed on- screen.
•If the NICAM audio setting (see NICAM Select on page 120) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular
06
•If the NICAM broadcast is bilingual, you can also select the language.
NICAM A
NICAM B
Regular NICAM A+B
•You can also select the language for a
A (L)
B (R)
A + B (L+R)
•When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 120), you can switch the audio channel between left (L), right (R) or both (L+R).
L
R
L+R
Note
•When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 120).
Switching between TV and DVD
NICAM
Regular
When the recorder is stopped or recording you can choose whether to have the audio/ video from the
Note
1. Channel presets are numbered 1 to 99.
55
En