93
Normal Operating Mode5.2 Normal Operating Mode

5.2.1 About normal operating mode

Normal operating mode enables the following:
1Input switching
• Pressing one of the INPUT buttons, 1 to 4 =Input switches over to the selected input.
• Pressing the INPUT button on the operating panel of the main unit =This switches the input to the next input.
2Screen-size switching
• Repeated pressing the (SCREEN) SIZE button on the remote control or the operating panel of the main unit
changes screen size in the following sequence:
At INPUT 1 or 2, or when reproducing video signals via INPUT 3 or 4
= NATURAL WIDE = 4 : 3 NORMAL = FULL = ZOOM = CINEMA WIDE =
When reproducing PC signals via INPUT 3 or 4
= ORIGINAL = 4 : 3 NORMAL = FULL = ZOOM =
(NOTES) • The screen size at which playback can be performed differs according to the input signal.
See 5.1.3, “List of supported input signals”.
Displays with “(TYPE)” appended, such as FULL (TYPE), will sometimes appear, indicating a simplified
reproduction.
• In INPUT 2, if an S1 video signal is detected, the screen size will automatically switch to FULL.
If S2 is detected, the screen size will switch to ZOOM.
• If an HDTV signal is detected, the screen size will switch to FULL (fixed).
• During video playback, switching screen size to ZOOM or CINEMA WIDE permits scrolling the screen
up or down with the 5 and ∞ buttons (V-SCROLL function).
Refer to section 5.1.4, “List of adjustable and settable items”.
You will note that the act of reduction, enlargement, etc. of the screen using the screen size changing
function of this machine at a coffee shop, hotel, etc. for profit or for public view may result in infringement
of the right of an author protected under the Copyright Law.
3Display call
• Press the DISPLAY button on the remote control.
=The current input function, the incoming signal's horizontal and vertical frequencies, current screen size, and
other characteristics are displayed on the screen.
(NOTE) The displayed horizontal and vertical frequencies are measured values, and there may be some error in the
measurements.
4Volume adjustment/Muting
• Push the VOL + button on the remote control. =The volume increases.
• Push the VOL – button on the remote control. =The volume decreases.
• Push the MUTING button on the remote control. =Each time the button is pushed, it switches from MUTING
ON to MUTING OFF, or vice versa.
5In addition to the above, several RS-232C commands are also available.
Refer to section 5.5, “RS-232C Adjustment Mode”.