Pioneer 502MX Installation Procedures, Transportation precautions, Unpacking, Ref. No Terms

Installation Procedures

3.3 Installation Procedures

3.3.1 Transportation precautions

1Any transportation of the unopened unit in its packaging should be done by two or more persons. To avoid injury

or damage, do not lift the package by its packing bands.

2When transporting or storing the unit, always position it vertically - never horizontally. Horizontal transportation or

storage invalidates the product warranty

3In transportation or storage of products in original packing, never stack more than three units high. This warning

is also indicated on the upper face of the carton.

4For transportation or storage, observe the warnings and instructions on the upper face of the carton.

5Plasma display is mode off grass. Please take precations to prevent it from being dameged.

3.3.2 Unpacking

The original packing material can be re-used to sofely ship the Plasma Display. When doing so, it is important to use the material in the same way as when they were originally shipped. Failure to correctly use the material can damage the display.

1) Packing specifications: 1341 (W) × 890 (H) × 424 (D), 53 kg

1

2

20

6 19

15

5

16

4

11 22 10

8

			9
			23
7
		Tape
	3
12	18	17	These accessories
			shall be packed in
		21
			a bag, which then
			shall be stuck to 19
		24	(front carton) with
13			a piece of adhesive
		25
		14	tape.

Ref. No. Terms

1Upper face of the carton

2Carton cover

3Lower face of the carton

4Upper pad L

5Upper pad C

6Upper pad R

7Under pad L

8Under pad C

9Under pad R

10Miller mat

11Power cord

12Remote control unit (CU-V159)

132 manganese AA batteries, R6P

14Operating instructions

15Guarantee

16Warranty card

17Binder Assembly

18Wiping cloth

19Front face of the carton

20Rear face of the carton

21Pin/BNC conversion connector

22Power cord case

23Display stand case

(with display stand inside)

24Remote control unit case

25Bolt, Washer

22