Special Installation (Place product upright and flush into wall (embedding in the wall))
3.4.7 Place product upright and flush into wall (embedding in the wall)
Carefully read the following before trying to embed the unit in a wall, and make sure to observe all the limitations specified below.
Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.
(1) Embedding in walls with space provided behind the unit.
A | X (Front of the unit) |
A
A
Y (Rear of the unit)
<Viewed from Above>
A
<Viewed from the Right Side>
✩Operating Temperature Restrictions
Temperature in space X and Y
A: 0 to 370 mm | 0 to 35 °C |
40
