|
| Table of Contents |
5.2 Normal Operating Mode | 93 | |
5.2.1 About normal operating mode | 93 | |
5.3 Menu Mode | 94 | |
5.3.1 About menu mode | 94 | |
5.3.2 Example of menu mode operation | 95 | |
5.3.3 Settings in menu mode | 97 | |
1) | Setting power save | 97 |
2) | Setting the color system | 98 |
3) | Setting the | 99 |
4) | Setting HIGH CONTRAST | 100 |
5) | Setting up peripheral equipment | 101 |
6) | Setting the input signal format | 102 |
7) | Setting the clamp position | 103 |
8) | ABL ON/OFF | 104 |
9) | H / V enhancement tuning | 105 |
5.3.4 Menu layers | 106 | |
5.4 Integrator Mode | 108 | |
5.4.1 About the integrator mode | 108 | |
5.4.2 Example of integrator mode operation | 109 | |
5.4.3 Adjustments and settings in the integrator mode | 111 | |
1) | Adjusting the PICTURE | 111 |
2) | Adjusting the WHITE BALANCE | 112 |
3) | Adjusting the SCREEN | 113 |
4) | Adjusting the side mask | 114 |
5) | Setting the color mode | 115 |
6) | Setting the mirror mode | 116 |
7) | Setting the brightness enhancement at the screen center | 117 |
8) | Setting OSD display | 118 |
9) | Setting the baud rate | 119 |
10) | Setting FULL MASK | 120 |
11) | Setting the cooling fan control formula | 121 |
12) | Checking the inside temperature | 122 |
13) | Checking the accumulated ON time | 122 |
14) | Adjusting SUB VOLUME | 123 |
15) | Initializing Adjustments (ALL DEFAULT) | 125 |
5.4.4 Menu layers | 126 | |
5.4.5 PICTURE and WHITE BALANCE adjustment values memory area tables | 128 | |
5.4.6 SCREEN adjustment values area tables | 130 | |
5.5 | 131 | |
5.5.1 About the | 131 | |
5.5.2 Interface | 132 | |
5.5.3 ID assignment | 133 | |
5.5.4 List of | 134 | |
5.5.5 About the GET commands | 136 | |
5.6 Combination Connection | 138 | |
5.6.1 Connections | 138 | |
5.7 KEY LOCK/UNLOCK | 140 | |
5.7.1 Functions | 140 | |
5.7.2 How to switch KEY LOCK/UNLOCK | 140 | |
5.8 Regarding the problem of images becoming burnt onto the screen | 141 | |
OPERATING PRECAUTIONS AND RECOMMENDATIONS | 142 | |
6.1 Operating Precautions and recommendations | 142 | |
MAINTENANCE AND CLEANING | 143 | |
CAUTION
•To prevent injury and material damage, thoroughly read this manual and all labels found on the equipment before attempting to mount, install, move, or adjust the product.
•Do not install the unit outside or in the open air. Doing so will lead to water seepage into the system, resulting in fire or electric shock.
•Be especially careful when working around parts of the system that have sharp edges.
•When performing installation work from a height, take suitable precautions to guard against falling. Set up a barrier around the work site to prevent accidentally dropped objects from injuring persons standing or walking below.
•Keep all foreign objects out of the unit. Do not tamper with the unit, or fire or electric shock may result.
•Observe the following operating environmental limitations:
Temperature: 0 to 40°C
Humidity: 20 to 80%
• Install the unit only in properly ventilated areas.
3
