Special Installation (Embedding in the wall)

3.4.3 Embedding in the wall

Carefully read the following before trying to embed the unit in a wall, and make sure to observe all the limitations specified below.

Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.

(1) Embedding in walls with space provided behind the unit (With no obstructions within a distance of 300 mm from the back surface of the unit).

X (Front of the unit)

A

A

Y (Rear of the unit)

A

<Viewed from Above>

A

<Viewed from the Right Side>

Operating Temperature Restrictions

 

Temperature in space X and Y

 

 

 

 

A: 0 to 370 mm

0 to 40 °C

 

 

*The same operating temperature restrictions apply to the speaker system (PDP-S03-LR).

Operating Temperature Restrictions for Upside-Down Installations

Ê* Upside-down mounting is unavailable when embedding this device in a wall.

30

Page 30
Image 30
Pioneer 502MX technical manual Special Installation Embedding in the wall, Viewed from Above Viewed from the Right Side