Integrator Mode
4)Adjusting the side mask
The side mask adjusts the brightness of
The brightness of each color of RGB can be adjusted separately.
In adjusting the side mask, think of how video signals develop with time, and also of a balance in brightness between the adjacent display sets.
(NOTE) During adjustment, a striped pattern may appear on the mask. This is not a fault.
1Enter the integrator moe. (refer to section 5.4.1, “About the integrator mode”).
The ID number of the unit of items will be indicated in the upper right corner of the screen, where “–
Select SIDE MASK.
2Select the desired adjustment item.
The screen size may momentarily switch.
Press the 2button on the main unit operation panel in order to return from Screen 2 to Screen 1.
Screen 1
|
| MENU |
|
| – – |
|
| PICTURE | R LEVEL | : 128 | |
] | WHITE BAL. | G LEVEL | : 128 | ||
SCREEN | B LEVEL | : 128 | |||
3SIDE MASK | V. SIZE | : 128 | |||
OPTION 1 | CLK FRQ | – – – | |||
: – – – | |||||
|
| OPTION 2 | CLK PHS | : | |
|
| SUB VOLUME | DEFAULT |
| |
|
| ALL DEFAULT |
|
| |
|
| MENU : MENU OFF |
| ||
|
| 5∞ | : SELECT |
|
|
| Screen 2 |
|
| ||
|
|
|
|
|
|
|
| MENU |
| 3R LEVEL | – – |
|
| PICTURE | : 128 | ||
|
| WHITE BAL. | G LEVEL | : 128 | |
] |
| SCREEN | B LEVEL | : 128 | |
| SIDE MASK | V. SIZE | : 128 | ||
| OPTION 1 | CLK FRQ | : – – – | ||
| OPTION 2 | CLK PHS | : – – – | ||
|
| SUB VOLUME | DEFAULT |
| |
|
| ALL DEFAULT |
|
| |
|
| MENU : MENU OFF |
| ||
|
| 5∞ | : SELECT |
|
|
3 Select the desired option. |
| Screen 3 |
|
|
| |
|
|
|
|
|
|
|
|
|
| SIDE MASK | 3CONTRAST : | – – | |
Make the adjustments using the 2 and 3 buttons on the |
|
| PICTURE | 128 | ||
|
| WHITE BAL. | BRIGHT | : | 128 | |
remote control or the operating panel of the main unit. | ] |
| SCREEN | COLOR | : | 132 |
|
| SIDE MASK | TINT | : | 132 | |
|
| OPTION 1 | SHARP | : 128 | ||
Press the SET button to return to screen 2. |
| OPTION 2 | DETAIL | : 128 | ||
|
| SUB VOLUME | RESET |
|
| |
|
|
| DEFAULT |
|
|
|
|
|
| MENU : MENU OFF |
|
| |
<Adjustable range> 0 to 255 for every item |
|
| R LEVEL | 128 |
|
|
|
|
|
|
|
| |
SIDE MASK applies to all inputs (INPUTs 1 to 4). |
|
|
|
|
|
|
Note that with side mark adjustment, there is no function |
|
|
|
|
|
|
for returning to the initial values (DEFAULT). Please take |
|
|
|
|
|
|
due caution. |
|
|
|
|
|
|
(NOTE) In the case that display with a side mask is impossible (for example in the case of high vision TV (HDTV) signal input etc.) side mask adjustment cannot be carried out.
114
