Pioneer 502MX technical manual Handling the Standard Mounting Components, Handling precautions

Handling the Standard Mounting Components

4.2 Handling the Standard Mounting Components

4.2.1 Handling precautions

This section of the manual discusses ways to mount, install, and handle the mounting hardware exclusively designed for our plasma displays. Mounting should be performed by qualified experts.

Refer all installation and mounting work to qualified persons, or request assistance from a Pioneer dealer.

4.2.2 Precautions for installation contractors

1)Before installation

Observe the specifications supplied in 3.1 “Installation Site Requirements”.

2)During Installation

Carefully read and observe the contents of this section of the manual. The installation work should be performed by two or more people.

3)After installation

After installation the mounting hardware, check for adequate strength and properly tightened screws. Repeat this inspection after mounting the display.

4)Delivering to the customer (1)Explaining mounting precautions

We ask that the mounting contractor explain the following precautions to the customer after mounting and installation work is completed. Even if the particulars of an installation are letter-perfect, your work may be perceived as inadequate unless you patiently and thoroughly explain these precautions so that the customer fully understands them.

¶The following are highly dangerous and must be avoided at all times:

• Any sudden application of force, including pushing and pulling

• Splashing water on the unit

• Placing any object on the unit

• Touching mount screws and other mounting hardware

¶For worry-free use of the unit:

•If any problem arises, the user should immediately ask the installation contractor to conduct inspection and repair.

•To guard against accidents, ask the customer not to make any tilt or height adjustments. Such work should be referred to the installation contractor.

(2)Mounting contractor contact form

We ask the mounting and installation contractor to complete the contractor contact form supplied with the unit and give it to the end-user after post-installation inspections are complete and the above precautions have been explained.

(3)Periodic inspections

Over time, aging of various components of the suspension/mounting hardware that are not readily visible may render the installation unreliable. This may possibly lead to the display breaking free of its mounting. Please recommend periodic inspections.

48