Pioneer 502MX Adjusting the Screen, Position = H.POSITION = CLK Freq = H.POSITION = CLK Phase

Integrator Mode

3)Adjusting the SCREEN

The items that can be adjusted here are H.POSITION, V.POSITION, V SIZE, CLK FREQ and CLK PHASE. (NOTE) With this unit, H. SIZE cannot be adjusted.

1Before entering the integrator mode, switch the unit to the specific input (one of INPUTs 1 to 4) in which adjustments will be made (refer to section 5.4.1, “About the integrator mode”).

The ID number of the unit of items will be indicated in the upper right corner of the screen, where “– –” is displayed in the illustration.

Select SCREEN.

2Select the desired adjustment item.

Select DEFAULT on Screen 2 to return all of the SCREEN adjustment values to their factory preset values (center values).

Push the 2button on the remote control or operating panel on the main unit to return to screen 1.

3Make the necessary adjustments.

(NOTE) V.SIZE can only be adjusted when video signals are being received. CLK FREQ and CLK PHASE can only be adjusted when PC signals are being received.

(NOTE) Three SCREEN parameter settings are required for each display screen size when displaying 1280 x 1024 / 60 Hz input. (1 For the 4:3 TYPE screen size, 2 For the FULL TYPE screen size, 3 For the ZOOM screen size)

Adjustments can be made using the 2 and 3 buttons (or the 5 and ∞ buttons for V.POSITION and V.SIZE) on the remote control or the operating panel of the main unit.

Screen 1

		MENU			– –
		PICTURE	H. POSI.	: 128
]		WHITE BAL.	V. POSI.	: 128
		3SCREEN	V. SIZE	: – – –
		SIDE MASK
		OPTION 1	CLK FRQ	: 128
		OPTION 2	CLK PHS	:	8
		SUB VOLUME	DEFAULT
		ALL DEFAULT
	Screen 2
		MENU	3H. POSI.		– –
		PICTURE		: 128
]		WHITE BAL.	V. POSI.	: 128
		SCREEN	V. SIZE	: – – –
		SIDE MASK
		OPTION 1	CLK FRQ	: 128
		OPTION 2	CLK PHS	:	8
		SUB VOLUME	DEFAULT
		ALL DEFAULT
		Screen 3
		SCREEN			– –
]
		H.POSITION	128

Values set and adjusted for H.POSITION, V.POSITION, V.SIZE, and CLK FRQ. serve as median values when adjustments are made in the menu mode.

CLK PHASE uses the same data as in menu mode.

Press the SET button to return to Screen 2.

<Adjustable Range>	0 to 255 (median 128) for H.POSITION and V.POSITION
	64 to 191 (median 128) for V.SIZE, CLK FREQ
	0 to 16 (median 8) for CLK PHASE
<Adjusting Order>	For the sake of efficiency, make adjustments in the following order:
	V.POSITION = H.POSITION = CLK FREQ = H.POSITION = CLK PHASE	113