Installation Procedures
4) Arranging and securing cables with speed clamps and bead bands
1 Fasten cables using the supplied speed clamps.
Remember that speed clamps are not easily removed, once fastened.
2 Secure cables with the supplied bead bands.
* Display viewed from the rear.
Cables may be drawn around to the right, viewed from this side.
1Secure cables with speed clamps.
2 1
Insert part 2 into an opening in the rear cover, then insert part 1, as shown.
2Bundle cables using bead bands. Use the head band at two positions within the
indicated range |
|
|
| . | |
| Cords |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Fastening points for speed clamps
Bundled cables can be drawn to the left or the right. Depending on specific requirements, you may use the four opening indicated by solid circles ¶.
How to unlock the speed clamp
Use a pair of pliers to twist the clamp by at least a
25
