Menu Mode
2)Setting the color system
INPUT 1 and 2 support all the various formats used in worldwide, which they distinguish between automatically.
CAUTION
This unit is not compatible with
Normally, COLOR SYSTEM:AUTO is set for distinguishing automatically, but occasionally there may be instances of faulty playback, “no color”, etc., as in cases of VTR signals from
In such a case, set as follows, according to the input signal.
Carry out the setting for either INPUT 1 or 2.
For NTSC signal input | = set COLOR SYSTEM : NTSC. |
For PAL signal input | = set COLOR SYSTEM : PAL. |
For SECAM signal input | = set COLOR SYSTEM : SECAM |
For 4.43 NTSC signal input | = set COLOR SYSTEM : 4.43 NTSC |
If you know what the previously input signal was, a fixed setting can be used for smooth signal handling; this can shorten
Factory preset: INPUT 1 : AUTO INPUT 2 : AUTO
1Select SET UP.
Screen 1
MAIN MENU | CONTRAST : 0 | |
PICTURE | ||
SCREEN | BRIGHT | : 0 |
ALL RESET | COLOR | : 0 |
POWER SAVE | TINT | : 0 |
3SET UP | SHARP | : 0 |
| RESET |
|
MENU : MENU OFF
5∞ 3 : SELECT SET : NEXT
2Move the cursor to COLOR SYSTEM, and press the SET button to change the setting. Pressing the SET button moves the settings through the sequence AUTO=NTSC=PAL=
SECAM=4.43 NTSC=···.
Screen 2
SET UP |
|
3COLOR SYSTEM | : AUTO |
3D Y/C MODE | : MOTION |
HIGH CONTRAST : OFF
EXIT
5∞ 3 : SELECT SET : CHANGE
98
