Pioneer 502MX ABL OFF ABL on, Intensity levels of input signals are faithfully reproduced

Menu Mode

8)ABL ON/OFF

Setting ABL: ON during playback of PC signals increases screen brightness.

If you set “ABL to ON” then the peak brightness will rise, and in addition the brightness of the pictures produced by input signals will change.

If the change is unsatisfactory, set ABL: OFF.

Differences between ABL ON and OFF (illustration):

ABL: OFF

ABL: ON

The intensity levels of input signals are faithfully reproduced.

For images with relatively high overall brightness, no significant change occurs (upper figure). But for dimmer images, peak intensity images are brighter when reproduced (lower figure).

Set-able condition	: PC signals supplied.
Factory preset	: ON
1 Select SETUP.	2 Move the cursor to ABL and use the SET button
	to change the current setting.
	Pressing the SET button toggles between ON
	and OFF.
	Screen 2

MAIN MENU	CONTRAST : 0
PICTURE
SCREEN	BRIGHT	: 0
ALL RESET	COLOR	: 0
POWER SAVE	TINT	: 0
3SET UP	SHARP	: 0

RESET

MENU : MENU OFF

5∞ 3 : SELECT SET : NEXT

SET UP
TERMINAL	: D-SUB
SETTING	: PC
SIGNAL	: RGB
CLAMP	: MODE 1
3ABL	: OFF
H. ENHANCE :		0
V. ENHANCE :		0

EXIT

5∞ 3 : SELECT SET : CHANGE

104